BJZPR - LEAD-ACID BATTERY

  • MSDS: BJZPR
  • Manufacturer: EXIDE CORP
  • Product Name: LEAD-ACID BATTERY
  • National Stock Number: 6140-00-822-0414
Product Identification

Product ID:LEAD-ACID BATTERY
MSDS Date:05/01/1991
FSC:6140
NIIN:00-822-0414
MSDS Number: BJZPR

Responsible Party
EXIDE CORPORATION
645 PENN STREET
READING, PA 19601
US

Emergency Phone: 215-378-0757

Info Phone: 215-378-0757

Cage: 60038

Contractor
TIMKEN CORP GOVERNMENT SALES BON-17
CANTON, OH 44706-2798 US

Telephone: 330-471-6587/330-471-6470 FAX

Cage: 60038

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 60%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ARSENIC (SARA III)

CAS: 7440-38-2

RTECS: CG0525000

Fraction By Weight: 0.2%

OSHA PEL 0.5 MG/M3 (AS)

ACGIH TLV: 0.01,A1 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CALCIUM, METAL

CAS: 7440-70-2

RTECS: EV8040000

Fraction By Weight: 0.2%


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0.2%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192


SULFURIC ACID (SARA III)

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 10-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CASE MATERIAL, (MADE OF POLYPROYLENE, POLYSTYRENE, STYRENE

Fraction By Weight: 5-10%

Hazards

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:LEAD EXPOSURE MAY CAUSE STOMACH
CRAMPS, ANEMIA, NERVE DAMAGE. SULFURIC ACID MAY CAUSE EROSION OF
THE TEETH.
Explanation of Carcinogenicity:ARSENIC IS CONSIDERED CARCINOGENIC BY
NTP, IARC OR OSHA.
Effects of Overexposure:COUGHING FROM ACID MIST.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:REMOVE FROM EXPOSURE. FLUSH ELECTROLYTE FROM SKIN WITH WATER.
FLUSH EYES FOR 15 MINUTES WITH WATER. SEE PHYSICIAN.

Fire Fighting

Lower Limits:4.1 % (H2)
Upper Limits:74.2 % (H2)
Extinguishing Media:CARBON DIOXIDE, FAOM, HALOGEN, DRY CHEMICAL
Fire Fighting Procedures:IF BATTERIES ARE ON CHARGE, SHUT OFF POWER.
WATER APPLIED TO ELECTROLLYTE GENERATES HEAT AND CAUSES IT TO
SPATTER.
Unusual Fire/Explosion Hazard:HIGHLY FLAMMABLE HYDROGEN GAS IS
GENERATED DURING CHARGING AND OPERATION OF BATTERIES. TO AVOID RISK
OF FIRE OR EXPLOSION, KEEP SPARKS/IGNITION SOURCES AWAY.

Accidental Release

Spill Release Procedures:DILUTE ACID WITH WATER, NEUTRALIZE WITH
CARBONATE.
Neutralizing Agent:CARBONATE

Handling

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES DURING
AND AFTER CHARGING.
Other Precautions:DO NOT SHORT TERMINALS WITH TOOLS, ETC.

Exposure Controls

Respiratory Protection:FOR SULFURIC ACID MIST EXPOSURE USE NIOSH/MSHA
APPROVED 1/2 MASK NEGATIVE PRESSURE WITH DUST AND MIST FILTER.
Ventilation:3 - 4 AIR CHANGES PER HOUR.
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:EYEWASH STATION
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:203F,95C
Vapor Pres:10
Vapor Density:>1
Spec Gravity:1.23-1.35
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:MANUFACTURED ARTICLE; NO APPARENT ODOR. ELECTROLYTE
IS CLEAR LIQUID W/ PEN. ODO

Stability

Stability Indicator/Materials to Avoid:YES
CONTACT OF SULFURIC ACID WITH COMBUSTIBLES AND ORGANIC MATERIALS MA
CAUSE FIRE AND EXPLOSION. REDUCING AGENTS, METALS.
Stability Condition to Avoid:PROLONGED OVERCHARGE; SOURCES OF IGNITION.
Hazardous Decomposition Products:MAY GENERATE ARSINE, STIBINE AND/OR
SULFURIC ACID MIST ON OVERCHARGE.

Disposal

Waste Disposal Methods:RETURN SPENT BATTERY TO SECONDARY LEAD SMELTER.
DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.